Root for Galaxy S III Mini I8190 4.12

Until somebody will release CWM Recovery or root for this device, I managed to create a pre-rooted firmware.
This firmware base on the last build for I8190, is a full firmware exactly like the original, except the root.
after flash you will see the SuperSU app in the app drawer.

flashing this firmware do not doing wipe data. you will not lose anything.
also, this flash not increase your download binary count.

This file will work on any firmware/baseband.

Caution!
This is only to the I8190, not I8190T or I8190N

base on - XXAMD3.
PDA - I8190XXAMD3
PHONE- I8190XXMB3
CSC- I8190OXAAMD3
Android version: Jelly Bean 4.12




Download
https://mega.co.nz/#!qIsiEZIZ!L7rPSS...XMnkC5fGcnCg3o

Installation instructions

• Download the zip file above and extract to some folder, you should receive a tar file. (Extract by double click on the 7z exe file)
• Open odin 3 (attached) and put the tar file in pda.
• Put the divece into download mode. (vol down + home + power button, and then click on vol up)
• Connect phone to usb and wait for odin detect the device.
• Click start.

p.s.
For some reason in some models it's impossible in this device to boot into recovery mode (by combination of buttons).
If you want to do wipe data doing it from the settings menu (factory reset) or if you have a boot loop problem, flash the attached file WIPE_I8190.zip (the tar file inside zip) via odin in pda, it will do wipe data automaticly.

Who happened to him soft brick as result of wrong flash (for example cf-root of I9300) and the phone stuck on boot, first flash root file and after this flash param_i8190.tar (attached). it will fix it.

Enjoy

Attached Files

	Odin3.zip - [Click for QR Code] (467.6 KB, 37011 views)
	WIPE_I8190.zip - [Click for QR Code] (2.1 KB, 19354 views)
	PARAM_I8190.zip - [Click for QR Code] (493.1 KB, 11737 views)